| Screenshots |
|
|
| Links |
|
Electrobel |
| RSS Feed |
|
|
| Hosted by |
Go to Menu->Options->MIDI
There you should see the VCI-100MkII listed (not the one with HID - in front)
Click it and select vestax_vci100mk2.xml
An alternative configuration is also available from djDecks user TinTin. More information can be found on the forum.
The faders, PFL button, equalizer and gain control the output for each of the decks.
The Cue and Play buttons will play and cue the track by default. In combination with shift, Cue and Play can be used to seek forward or backward in the track.
When the filter effect is active, the filter knob will act as a low-pass filter from center to left, and a high-pass filter from center to right.
A 4-beat loop can be started using the Loop button. The loop length can be adjusted using the 2 size buttons.
In combination with shift, the loop button will start an 8-beat loop, and the 2 move buttons can be used to move the loop forward or backward without changing its length.
2 cue points are available next to the Cue button. Use in combination with shift to record the current position to that cue point.
To select which effect to control, hold the small FX1 button at the top, and press one of the 4 buttons beneath the FX control knobs.
Flanger
The 4th button activates/deactivates the flanger. The first knob selects strength, the second knob the speed, the third knob the sound.
The first button activates/deactivates the automatic movement of the sound. The third button activates the high-pass filter, which prevents the flanger to affect the low frequencies too much.
Echo
The first knob selects the echo strength, the second the echo length. The third knob controls the high-pass filter, the third button controls the low-pass filter.
The 4th button toggles the echo like a loop, which can be used for loop-roll-like effects.
Bitcrusher
The 4th button activates the bitcrusher. The first knob controls the resampler, the second knob the bit-reducer.
Filter
The filter is activated and controlled using the Filter button and knob.
The first knob can be used to change the bandwidth of the filter, causing it to be more or less pronounced.
Scroll through the list with the browser up/down buttons. Clicking the joystick button will switch the active list between folders, files and current playlist.
To open a selected folder, use the Load button of any of the decks.
To load a selected song, use the Load button on the deck you want to load the song on.
djDecks (c)2003-2023 Adion
