Documentation

Numark V7

Numark V7 The latest djDecks DX beta is required to use this device.

Configuration - Controller

Go to Menu->Options->MIDI
There you should see the V7 listed as "Numark V7 MIDI"
Click it and select numark_v7.xml

If you have 2 (or more) units, do the same for each. Now right-click the other units, and select a player offset for each (+1 for the second, +2 for the third, ...)
This ensures that each unit will control a different deck.

Thanks to Shawn Armstrong for creating the mapping for this device.

Configuration - Audio Device

Go to Menu->Options->Sound.
For Output 1 and Output 2 select 'ASIO - V7 USB Audio Device', and select the output channel numbers. (1/2 for the first, 3/4 for the second)
If you have more units, select the other outputs as well.

General Use

1. Playlist Navigation Group

Use the knob to select a file or folder.

'Crates' selects the folder list, 'Prepare' selects the current playlist, 'Files' selects the currently opened folder.

When in 'Crates' the Load buttons will open the selected folder, otherwise they will load the selected file to the selected deck.

'Load Prepare' will add the selected file to the current playlist.

2. Tempo Control On/Off

3. Pitch Range

4. Pitch Slider

5. Pitch Bend

6. Platter

When 'Motor Off' is active, it will not rotate, and can be used for pitch bend.

Otherwise it works like a normal turntable platter.

7. Play

8. Cue

9. Match BPM

10. Cue Points

11. Cue Point Tab Select Button:

No light: Pressing a cue point button plays from that cue point. If no cue point is in that slot, stores the current position in that cue point.

Solid: Pressing a cue point deletes the cue point

12. Effect On/Off

13. Effect parameter control. Typically controls the effect's depth or strength

14. Effect parameter control. Controls all other parameters of the effect

15. Effect and parameter selector.

Turning this knob scrolls through the effects. When on an effect, pushing the knob down scrolls through the possible effect parameters and sequentially assigns control of each parameter to knob 14.

Order of the effects and parameters are:

Amplifier (Gain)

Slider 13: n/a

Knob 14-1: Gain

Pitch Lock (Turning knob 13 changes the pitch of the deck while the pitch of the other deck is simultaneously matched to it)

Slider 13: Relative pitch slider

Knob 14-1: Synced step of 0.10%

Knob 14-2: Synced step of 0.25%

FX On/Off: Enable/Disable Syncmode

Tempo Control

Slider 13: Tempo amount

Knob 14-1: Tempo tempo

BeatGrid

Slider 13: n/a

Knob 14-1: BPM_Down (left)/BPM_Up (right) in 0.01 increments

FX On/Off-1: Add Beat Point (toggle by pushing knob 15)

FX On/Off-2: Remove Beat Point (toggle by pushing knob 15)

BitCrusher

Slider 13: Down Sample

Knob 14-1: Bit Depth

Knob 14-2: Overdrive

Echo

Slider 13: Depth

Knob 14-1: Length

Knob 14-2: Source

Knob 14-3: Lowpass

Knob 14-4: Highpass

Knob 14-5: Stereo Offset

Knob 14-6: Lock Buffer

Equalizer

Slider 13: n/a

Knob 14-1: High EQ Freq

Knob 14-2: Mid EQ Freq

Knob 14-3: Low EQ Freq

Filter

Slider 13: Bandwidth

Knob 14-1: Filter Frequency

Flanger

Slider 13: Strength

Knob 14-1: Length

Knob 14-2: High Pass

Knob 14-3: Mode

Knob 14-4: Sound

Knob 14-5: Stereo Offset

Gapper

Slider 13: Strength

Knob 14-1: Length

Knob 14-2: Shape

Knob 14-3: Stereo Offset

LFO

Slider 13: Min Value

Knob 14-1: LFO Speed

Knob 14-2: Shape

Loops

Slider 13: n/a

Knob 14-1: n/a

Mixer

Slider 13: n/a

Knob 14-1: High EQ Gain

Knob 14-2: Mid EQ Gain

Knob 14-3: Low EQ Gain

Panning

Slider 13: Front-Rear

Knob 14-1: Left-Right

Reverb

Slider 13: Strength

Knob 14-1: Roomsize

Knob 14-2: Diffusion

Knob 14-3: Damping

Knob 14-4: Wet Only

16. Pitch Reset

17. Reverse/Dump: Up = Dump, Middle = Normal; Down = Reverse

18. Turn Motor On/Off

19. Loop control Group

20. Loop On/Off

21. Loop Auto/Manual Mode - Colour coded: White = Manual; Red = Auto; Mode does not affect 1/2X and 2X buttons

1/2X divides loop length in half; 2X doubles loop length

Manual mode:

IN: sets start of loop

OUT: sets end of loop

LOOP: turns loop on/off

RELOOP: Reloops

Loop Shift: Changes the length of the loop

Auto Mode:

1, 2, 4 & 8: loops that number of beats

Loop Shift: Moves the loop forwards or backwards

22. Set the Startup and Brake speeds

23. Touch anywhere along the strip to seek to that position in the song

24. CPU Usage